Scubapro Pressure Gauge Standard
The Scubapro Pressure Gauge Standard is a classic Scubapro Manometer for divers,
an underwater pressure gauge for regulators, the larger version of the popular Scubapro Pressure Gauge Mini,
both very precise and reliable analogue pressure gauges for divers.
Robust construction for demanding dives
The Scubapro analogue underwater manometer is built to display high pressures of up to 300 bar and to withstand dives to a maximum depth of 150m. Built with a robust brass shell and a thick, unbreakable rubber outer casing and equipped with a practical overpressure valve, it will join you on lots of dives and will survive many impacts unscathed.
Good readability even in poor visibility
So that you can still keep an eye on your air supply even in cloudy water or in suboptimal lighting conditions, the Scubapro Standard manometer is equipped with a bright display with good contrast, a clearly visible scale in 10 bar increments with a red reserve range from 0 to 50 bar and with a fluorescent background that will be very helpful especially during night dives.
The Scubapro pressure gauge is delivered to you with the appropriate high-pressure hose and you only have to mount this on the first stage of your regulator - remove the HP blind plug, lightly grease the O-ring of the pressure gauge HP hose with silicone, screw the HP hose into the high-pressure port of the the 1st stage, tighten and you're ready to go.
Pressure gauge or an instrument console?
In our online dive shop you will also find other reliable and robust underwater pressure gauges and also a large selection of diving instrument consoles, with different instrument combinations, such as consoles with depth gauges and pressure gauges like the Mares Mission 2 console, consoles with pressure gauges and compasses like the Scubapro Mako console , triple console with pressure gauge, depth gauge and compass like the Mares Mission 3 console but also consoles with pressure gauge and dive computer like the Suunto CB-2 In Line Combo.
Instrument type: pressure gauge, underwater manometer
Suitable for: Diving, Recreational and Technical
Fits: any regulator with a standard HP port
Maximum operating depth: 150m
Maximum working pressure: 300 bar
Unit of measurement: metric
Material shell: brass
Material outer casing: rubber, technopolymer
Scale: in 10 bar steps, good contrast, reserve range from 0 to 50 bar with red background
Background fluorescent: yes
Pressure relief valve: yes, plastic disc that is pressed out of the housing when the pressure is too high.
HP hose incl.: yes
1x Scubapro Manometer Standard incl. HP-hose