H1 Waterproof 3/5 mm Neoprene Hood with Air Vent (with Collar)
The Waterproof H1 Hood is a high quality Waterproof 5mm ventilated bonnet, made from a blend of 3 and 3mm neoprene, with a wide collar and innovative ventilation system.
The H1 Waterproof 3/5mm ventilated bonnet is a thin neoprene bonnet that ensures that the diver's head is protected even in cool water. The diver's sensitive head gives off enormous amounts of body heat during diving, which can lead to rapid hypothermia even in not so cold water - only a well-fitting neoprene bonnet, such as the H1 Waterproof Hood 3/5 mm, can help. The Waterproof H1 3/5mm can also be useful as a windbreak on the surface or on a boat.
Like all Waterproof products, the Waterproof H1 3/5 mm diving bonnet is a real high-tech product and not just a thin neoprene bonnet with a collar, because it is packed with practical and modern features, such as the innovative venting system.
Every diver knows the problem of air in the headgear, which can mess up the whole buoyancy control, or at least lift the headgear off the head to the point where a gush of cold water enters. Unpleasant! Have you ever reached for the scissors to drill a hole in the upper part of the diver's headgear? The air problem is solved, but now a little cold water always penetrates the bonnet. Waterproof has built an ingenious solution for this into its H1 3/5mm neoprene headgear: the H.A.V.S. bonnet venting system. This system consists of a one-way valve that ensures that the air that enters the bonnet can immediately escape to the outside, but water cannot enter the bonnet from the outside. And the Waterproof 3/5 mm neoprene headgear has two of these air vents, so that the air can escape in any head position.
From the very flexible and durable neoprene material with I-Span Super Stretch Nylon coating for maximum comfort to the perfect fit, the sophisticated cut and the many practical details, the Waterproof H1 3/5 mm neoprene bonnet leaves nothing to be desired.
The Waterproof H1 3/5 mm hood for diving is made of two material thicknesses to provide maximum protection against the cold and optimum comfort at the same time. The 5mm neoprene in the head area of the Waterproof 3/5 mm bonnet with air release valve keeps the diver's head warm, and the 3mm neoprene in the collar area ensures a comfortable fit around the neck without constricting the diver when worn.
The Waterproof 3/5mm collared headgear is anatomically shaped and features smooth neoprene cuffs for easy donning and doffing and maximum comfort while diving.
The reflective logos on the forehead and neck of the Waterproof 3/5 mm neoprene bonnet with collar ensure good visibility even in murky water. And, any other wishes? Maybe a Waterproof bonnet without collar, or a thick neoprene bonnet? Then take a look at the other Waterproof neoprene bonnets with venting system in our online diving shop.
Cut: head bonnet with collar, 3-D anatomically pre-shaped
Material: 5 and 3 mm I-Span superstretch neoprene
Cuff material: Smooth skin neoprene cuffs
Valves: H.A.V.S. system (two valves)
Seams: flat stitched with coated Hi-Q nylon thread
Special features: Reflective logo
1x H1 3/5 mm Hood with air exhaust valves in the selected size
Size Chart for Waterproof H1, 3/5mm Hood
|Head Circumference (cm)